HIBER P06.64E
Model
P06.64E
Operating temperature
Positive and Negative Abatement
Power supply
230/1/50
Max power W
1370/6.7
Refrigerant gas
R452A
Max blast chilling yield
19
Max blast chilling yield
12
Dimensions
790x800x850
TECHNICAL FEATURES
CONSTRUCTION FEATURES
• Monocoque construction in AISI 304 stainless steel with Scotch-Brite satin finish on 4 sides and top
• Fully rounded interior in AISI 304 stainless steel
• Molded internal containment bottom with central drain for washing water discharge
• Insulation in high density polyurethane foam (about 42 kg/m3) 60mm thick, HCFC free
• Evaporating coil in copper-aluminum, with anticorrosive cataphoresis treatment, with flap that can be opened on hinges, for cleaning
• Copper condensing coil with high thermal yield aluminum fins
• Anti-condensation heater, located under the rebate frame
• Full height ergonomic handle and magnetic seals on the 4 sides of the door
INTERNAL EQUIPMENT
• Tray holder support in AISI 304 stainless steel
• 6 pairs of removable L-shaped guides in AISI 304 stainless steel, which can be interlocked every 20 mm, for EN1 600x400 trays or grids
• Heated core probe, with 1 measuring point
• Microswitch which blocks ventilation when the door is opened
FUNCTIONS
• Positive abatement
• Negative abatement
REFRIGERANT UNIT
• Thermal protector to protect the compressor
• Manual defrosting
• Electronic fans with indirect flow on the product
• R452A refrigerant fluid
• Evaporator with large exchange surface, for high efficiency of the cooling system
ELECTRONIC CONTROL
• Electronic membrane control
• Front IPX4 organized electrical panel, easy to access
EQUIPMENT ON REQUEST / ACCESSORIES
• Swivel castor kit, two with brakes
• Removable steriliser
• Port inversion
P06.64E
Operating temperature
Positive and Negative Abatement
Power supply
230/1/50
Max power W
1370/6.7
Refrigerant gas
R452A
Max blast chilling yield
19
Max blast chilling yield
12
Dimensions
790x800x850
TECHNICAL FEATURES
CONSTRUCTION FEATURES
• Monocoque construction in AISI 304 stainless steel with Scotch-Brite satin finish on 4 sides and top
• Fully rounded interior in AISI 304 stainless steel
• Molded internal containment bottom with central drain for washing water discharge
• Insulation in high density polyurethane foam (about 42 kg/m3) 60mm thick, HCFC free
• Evaporating coil in copper-aluminum, with anticorrosive cataphoresis treatment, with flap that can be opened on hinges, for cleaning
• Copper condensing coil with high thermal yield aluminum fins
• Anti-condensation heater, located under the rebate frame
• Full height ergonomic handle and magnetic seals on the 4 sides of the door
INTERNAL EQUIPMENT
• Tray holder support in AISI 304 stainless steel
• 6 pairs of removable L-shaped guides in AISI 304 stainless steel, which can be interlocked every 20 mm, for EN1 600x400 trays or grids
• Heated core probe, with 1 measuring point
• Microswitch which blocks ventilation when the door is opened
FUNCTIONS
• Positive abatement
• Negative abatement
REFRIGERANT UNIT
• Thermal protector to protect the compressor
• Manual defrosting
• Electronic fans with indirect flow on the product
• R452A refrigerant fluid
• Evaporator with large exchange surface, for high efficiency of the cooling system
ELECTRONIC CONTROL
• Electronic membrane control
• Front IPX4 organized electrical panel, easy to access
EQUIPMENT ON REQUEST / ACCESSORIES
• Swivel castor kit, two with brakes
• Removable steriliser
• Port inversion
Gallery